Untitled Document
Specifications:
Width Length Ground: 6" x 10"
Table to Spindle center: 12"
Longitudinal Table Travel: 13" 1/2"
Cross Travel: 6"
Grinding Wheel Capacity: 7" x 3/4" x 1 1/4" hole
Permanent Magentic manual Chuck 6" x 10"
Adjustable frequency inverter drive: 240 Volts 7.2 Amps
Spindle Speed from 0-365 RPM
Crossfeed Movement Per Rev of Handwheel: 0.100"
Crossfeed Handwheel Grad: 0.001"
Crossfeed Fine feed knob Grad: 0.00005"
Vertical Feed Per Rev. of Handwheel: 0.050"
Std. Handwheel Grad: 0.0005"
Fine Feed knob Grad: 0.00005"
Machine Features:
Cast Iron, Heavily Ribbed Construction W/small Footprint
ball mounted table, Roller Mounted Saddle & Ball Tracked Column,
Plus Ball Bearings Throughtout, Provide for extremly high precision capability.
Replaceable Longitudinal ways (VEE & Flat Way)
Crossfeed has Anti-Backlash Nut Assembly
Saddle Lock for conenience in form grinding operations
Saddle is supported on two hardened & Ground flat steel ways.
Entire Spindle column moves for vertical Spindle feed fine feed
Knob for vertical axis (.00005" Grad.) 1 H.P. Taft Peirce Super-Precision Spindle Drive
Automatic Lubrication System
Equipped With:
Tilting wheelhead option (30 Degrees)
-This facilatates grinding to sharp corners & Shoulder as well as finishing of slots, Dovetails
& Undercuts with the angular face or periphery of the wheel.
Machine is presently wired for 220 Volts
Dimensions:
W: 61" x D: 45" x H: 66"
Approximate Weight: 1,700 Lbs
Preliminary Specifications Subject to Verification